This paper reported a method in determination of the optimum diaphragm of a tool microscope through experiment, and gained a good result. 本文介绍了通过实验确定工具显微镜最佳光阑的方法,并取得了很好的效果。
To improve the teaching efficiency, by using the opto-mechatronics technology, the equipment of large-size tool microscope is rebuilt. 螺纹相关参数的测量是互换性与技术测量实验课中的一个重要实验,通常在大型工具显微镜上面测量。
The precision of the mechanic parts can be measured even without instrument such as universal tool microscope ( micrometer). 不用万能工具显微镜这样的仪器,也能测量机械零件的精度。
Tool Microscope Rebuilt with CCD Vidicon and Application in Cutting Experiments 用CCD改造测量显微镜及其在切削实验中的应用
Tical thread tool microscope 光学螺纹工具显微镜
So the article suggests that the image processing and analysis method should be used on the tool microscope. Not only can this method check the measuring accuracy of microcomponents, but it also can check its form and position deviation. 因此本文提出在工具显微镜上采用图像处理与分析方法,这种方法不仅可以检测微小零件的尺寸精度,还可以检测其形位误差。
The shape and dimension of the V-notch impact samples were checked by a universal tool maker's microscope. The checking data can be used to direct the adjustment of the V-notch broacher so as to process the qualified samples. 利用万能工具显微镜对V型缺口冲击试样的形状及尺寸进行检查,并以此数据指导V型缺口拉床的调整,加工出合格的试样。
Using Universal Tool Microscope to Measure Tooth Error of the Cylindrical Gear with Narrow Helical Tooth 用万工显测量窄斜齿圆柱齿轮齿向误差
Check the shape and dimension of the V-notch impact samples by a universal tool maker's microscope 用万能工具显微镜检验V型缺口冲击试样的形状及尺寸
Research of Image Processing Used in Omnipotence Tool Microscope 用于万能工具显微镜的图像处理技术研究
Study of Independent Data Auto-acquisition and reading System for Eye Lens of Universal Tool Maker's Microscope 分立式万能工具显微镜目镜视场数据自动采集的研究
The application of a computer-like universal tool microscope in the sophisticated measurement 微机型万能工具显微镜在精密测量中的应用
Measurement System by Using Universal Tool Microscope and Microcomputer 微机万工显测量系统
A measurement system by using Universal Tool Microscope and microcomputer is introduced, which makes use of software subdividing technique. 介绍了一种微机型万工显测量系统,该系统应用软件细分技术提高了分辨率与测量精度,降低了万工显微机化的成本。
This paper introduces four methods for measuring the circular radius on the universal tool maker's microscope and its application, also provides the computative formulations. 本文介绍在万工显上测量圆弧半径的四种方法及其应用范围,并给出了计算公式。
Design of and Error Analysis on Image-Based Omnipotence Tool-Microscope 基于图像的万能工具显微镜设计及误差分析
This paper introduces a handy method to measure the base level mid-diameter of taper thread guage with image and axes tangent method on the omnipotence tool microscope. 介绍一种在万能工具显微镜或大型工具显微镜上用影像法、轴切法测量圆锥螺纹塞规基面中径的简便方法。
This paper introduces the measurement principle and method of small-hole diameter by laser, minus lens, and digital caliber rule, besides it has carried out the contrastive measurement by laser and universal tool microscope. 介绍用激光、负透镜和数显卡尺测量微小孔径的测量原理、测量方法,并用激光和万能工具显微镜对小孔孔径进行了对比测量。
From cutting geometry parameters and machining conditions, the article analyses the chip flow direction of oblique cutting, suggests a mathematical model of the chip flow angle and presents a measuring chip flow angle with a tool microscope. 本文从刀具几何参数和加工条件两个方面,对斜角切削的流屑方向进行了分析,提出了流屑角的数学模型。介绍了用工具显微镜测量流屑角的方法。
The sampled data is got on a universal tool microscope and the results of data processing with microcomputer are given. 在万能工具显微镜上得到了采样数据并给出了微机数据处理结果。
Study on Division of Scale Pulse With Software in the Improvement of Universal Tool Microscope 万能工具显微镜技改中软件细分技术研究
Regarded as the traditional 2-D coordinate measuring system, omnipotence tool microscope has the most extensive application in the geometry measurement. 万能工具显微镜作为传统的二维坐标测量系统,在几何测量中具有最为广泛的应用。
A Kind of Method of Improving the Universal Tool Microscope Based on Digital Division Technique 一种基于数字细分技术的万工显技改方法
This paper introduced the methods of measuring cylinder ring gauge inner diameter with optics sensitive lever on all-purpose tool microscope. And an evaluation of analysis to the uncertainty of measuring methods is made. 本文介绍在万能工具显微镜上用光学灵敏杠杆测量圆柱环规内径的方法,并对该测量方法的不确定度进行分析评定。
In general, accuracy requirement of geometrical dimension and shape tolerance in small diameter and short axis kind of parts is higher. Traditional all-purpose tool microscope hardly ensures their measuring accuracy. CCD optic measuring system can solve this problem commendably. 小直径轴类零件的几何尺寸和形状公差一般精度要求较高,采用传统的万能工具显微镜难以保证精度,CCD镜头光学测量可以很好地解决这类问题。
We may solve above problem better by using a microcomputer combined with an universal tool microscope to make up an on line data processing system. 我们用微型计算机与万能工具显微镜组成联机数据处理系统,可以较好地解决上述问题。
The measuring principle of concentric grade helix angle of involute spur gear is put forward, the measuring method of the concentric grade helix angle in the universal tool microscope is introduced and the measuring precision of the method is analyzed. 阐述了在万能工具显微镜上利用灵敏杠杆和自制测头实现分度圆螺旋角的精确测绘方法,分析了该方法的测绘精度。
With high speed development in manufacturing, the traditional manual strain measurement methods which used mylar tape and tool microscope have gradually exposed some disadvantages such as low efficiency and poor accuracy in most sheet metal stamping situations. 随着制造业的高速发展,采用工程应变比例软尺或者工具显微镜的手工应变测量方法在板料成形性能分析中逐渐暴露出测量效率低、精度差等弊端。
Calibrate the system by two gauge blocks, compare the results with universal tool microscope. 最后使用叠加的两块量块对系统进行标定,再将图像测量的结果与工具显微镜测量的结果进行比对。